The magnetic drive pump has advanced design and no shaft seal. As a centrifugal pump with no leakage, maintenance-free and good operation reliability, it has the characteristics of safety, high efficiency and energy saving.
It is suitable for conveying corrosive, toxic, flammable, explosive, expensive or easily vaporized liquids. In addition, Hermetic magnetic pumps are also suitable for conveying high temperature, low temperature fluids and liquids in vacuum. Due to the advantage of being completely leak-free, it has successfully solved the problems of running, running, dripping and leaking in fluid transportation, and has become an irreplaceable product in environmental protection engineering, widely used in petroleum, chemical, refrigeration, air conditioning, aerospace, etc. in the field.
Compared with the traditional sealed pump, it has the advantages of less maintenance and repair work, no need to add lubricating oil, no leakage, and low vibration and noise. However, due to its own characteristics, it is different from traditional centrifugal pumps in many aspects, so some measures and approaches should be taken in terms of process, installation, operation, etc. to ensure its reliable and stable operation.
Features of Magnetic Pump
1. Structure: The magnetic pump is a horizontal, completely leak-free centrifugal pump with axial suction and radial discharge. The pump shaft is driven by a magnetic coupling and has no rotating shaft sealing device. Hermitic magnetic pump achieves "zero leakage".
2. Bearings: The drive shaft of the magnetic pump is supported by rolling bearings, which are lubricated by its own grease; the pump shaft is supported by hydraulic sliding bearings.
3. Magnetic coupling: The magnetic block of the magnetic pump is a high-quality rare earth permanent magnet material, and its high irreversible reversal temperature can reach 350-400 ℃, which fully guarantees the reliable performance of the magnetic coupling. During normal operation, the magnetic coupling and the three-phase asynchronous motor run synchronously with stable performance. Moreover, the permanent magnets have high stability, which can prevent adverse effects when assembling and disassembling the rotor or when the pump works under high transmission torque.
4. Lubrication of sliding bearing and cooling of magnetic coupling: lubricated and cooled by the medium conveyed by the pump, without additional lubricating oil and cooling water system.
5. Axial force balance: During operation, the axial force of the Yangzijiang magnetic pump is automatically balanced by hydraulic power, and the push plate only bears the instantaneous axial thrust when starting and stopping.
https://www.wxxjyby.com/