1. Submerged pump work Part of the water is submerged in the liquid, the shaft seal has no leakage, and it occupies a small area, the operation is quiet and no noise, the application is firm, the maintenance is convenient, and the corrosion resistance is strong.
2. The column-type motor of the submerged pump is fastened to the motor seat with anchor bolts, and goes through the elastic coupling and the pump immediate transmission system, pump housing, management center acceptance, pump frame, discharge pipe, pipe flange, It is connected by anchor bolts to form an integration, which is fixed on the base plate, and all the staff of the sump pump are installed on the vessel through the base plate. The radial force and axial force of the pump, (including the water working pressure often generated during pump work, the weight of centrifugal impeller and motor rotor, etc.) are all composed of single-sided thrust ball bearings and single-row radial ball bearings installed in the rolling bearing box; and The drag guide shaft is adopted to ensure the safety of the pump and all work normally. The rolling bearing is smooth and clean with unsalted butter, which guides the rolling bearing and the liquid to be smooth and clean.
3. When the submerged pump is working, the liquid level must be higher than the axis of the centrifugal impeller. The length of the extended container L is different, and it is divided into the structure of the management center guide rolling bearing and the structure of the management center guide rolling bearing.
4. The submersible pump is made into specifications and models according to the length of the container (usually 1 to 1.5m). The sealing filling has a refrigeration system, which can be taken with cooling circulating water according to the temperature of the customer's application material Heat.
https://www.wxxjyby.com/