The biggest feature of the submersible sewage pump is that it can be installed at a high place to directly suck water up from above. This process takes about a few minutes, but we sometimes need to absorb water quickly, so we should understand and improve The methods of the water absorption speed of the submersible pump, then we will introduce several.
First, install a vacuum pump directly at the inlet of the submersible sewage pump for pumping. Here we recommend a water ring vacuum pump. This kind of pump is much faster than the ordinary submersible sewage pump in the speed of sucking air. As long as we add the water ring vacuum pump, it only takes tens of seconds to quickly absorb water.
Second, install a well-sealed bottom valve at the water inlet at the bottom of the pool of the submersible sewage pump. As long as the water is sucked up, the remaining water will always remain inside the pipeline. The next time the submersible sewage pump is started, it can be Avoid re-venting, which can also improve the water absorption rate of the submersible sewage pump.
The above is the method to improve the water absorption speed of submersible submersible pumps, but it should be noted that the self-priming height of general submersible pumps is about 5 meters. If customers need a higher self-priming height, they need to declare to the submersible sewage pump manufacturer in advance, otherwise they will buy the wrong one. product, not worth the loss.
https://www.wxxjyby.com/